The shop floor behind the tolerances.
Milling, turning, EDM, grinding, and inspection under one roof, from manual jig bore work to a lights-out 5-axis pallet cell. Most work falls within a one-cubic-foot envelope; we machine parts from nearly microscopic up to a 40-inch cube.
3, 4, and 5-axis machining centers
From a single 5-axis setup to a 10-pallet pool for unattended runs, our machining centers hold close tolerances across aluminum, steel, stainless, and exotic alloys.
| Qty | Machine | Axes / Tools | Travel |
|---|---|---|---|
| 1 | Haas VF-4SS Vertical Machining Center | 5-axis, 40 tool | 50 × 20 × 25″ |
| 1 | Haas VF-5SS Vertical Machining Center | 4-axis, 50 tool | 50 × 26 × 25″ |
| 1 | Matsuura MX330 PC10 (10-pc pallet pool) | 5-axis, 90 tool | 17.13 × 18.31 × 22.05″ |
| 1 | Matsuura MC-800 VGII Vertical Machining Center | 4-axis | 31 × 20 × 20″ |
| 1 | Matsuura ES-800V Vertical Machining Center | 4-axis | 31 × 21 × 20″ |
| 1 | Fanuc Robodrill D21MiB5 | 4-axis, 21 tool | 19.7 × 15.8 × 13″ |
Precision manual and jig-bore work
Moore jig bores and TRAK CNC bed and knee mills handle the close-position, low-volume, and rework jobs where a skilled hand still beats a program.
| Qty | Machine | Type | |
|---|---|---|---|
| 4 | TRAK DPM CNC Bed Mill | 3-axis CNC | |
| 2 | TRAK SMX CNC Knee Mill | 2-axis CNC | |
| 1 | Moore Jig Bore | No. 1½ | |
| 1 | Moore Jig Bore | No. 2 | |
| 1 | Moore Jig Bore | No. 3 | |
Turning and mill/turn centers
Twin-spindle mill/turn and CNC turning centers, backed by manual ProtoTRAK lathes, complete turned and prismatic features in a single handling.
| Qty | Machine | Capacity | Max Swing / Turn |
|---|---|---|---|
| 1 | Okuma Multus B250II Mill/Turn (twin spindle) | 2.598″ bar, 40 tool | 23.62″ swing / 23.62″ dia |
| 2 | Nakamura-Tome SC-300 Turning Center | 2.80″ bar, 12 tool | 22.05″ swing / 13.78″ dia |
| 1 | Okuma Genos L250II-E/500 Turning Center | 2.60″ bar, 12 tool | 17.72″ swing / 11.02″ dia |
| 1 | Victor 16 × 40″ Engine Lathe (Acu-Rite MillVision) | Manual | 16 × 40″ |
| 3 | TRAK TRL ProtoTRAK CNC Lathes (1845SX, 2470RX, 1840V) | CNC | — |
Submersible wire & hole-drill EDM
High-speed submersible wire EDM produces intricate, burr-free geometries and tight internal features that milling can't reach.
| Qty | Machine | Max Cutting (X × Y × Z) | |
|---|---|---|---|
| 2 | Agie Progress II Submersible High-Speed Wire EDM | 350 × 250 × 256 mm | |
| 1 | Agie Agiedrill EDM Drilling Machine | 300 × 200 × 300 mm | |
Jig, surface, and I.D./O.D. grinding
Jig grinding and precision surface and cylindrical grinding deliver the finishes and geometric control that tight-tolerance parts require after machining.
| Qty | Machine | Capacity | |
|---|---|---|---|
| 1 | Moore No. 2 Jig Grinder | Precision jig grinding | |
| 1 | Kellenberger 1000UR I.D./O.D. Grinder | 10 × 40″ | |
| 1 | Kellenberger 600U I.D./O.D. Grinder | 10 × 30″ | |
| 1 | Heald 237A Universal I.D. Grinder | Internal grinding | |
| 4 | Surface Grinders (Harig 612, Mitsui 612) | 6 × 12″ | |
| 1 | Okamoto ACC 8-20 ST Surface Grinder | 8 × 20″ | |
Honing, deburring, cleaning & packaging
Because finishing and packaging are in-house, parts leave inspected, clean, and ready to install without going out to another vendor.
How we prove the part is right.
Every job is inspected against your print by a dedicated QC team, from incoming material through final inspection, with lot traceability maintained from raw material through delivery. Our quality system has been ISO 9001:2015 certified since 2014, under registration 74 300 3699.
On request, we provide certificates of conformance, material certifications, and first article inspection documentation to support regulated aerospace and defense work.
| Qty | Metrology | Detail |
|---|---|---|
| 1 | Mitutoyo Programmable CMM (Model 574) | 20 × 28 × 16″ |
| 1 | Mitutoyo PH3500 Optical Comparator | Optical |
| 1 | MicroVu H14 Optical Comparator | Optical |
| 2 | Trimos V4 Height Gages | Linear |
| — | Full inspection line | Dial bores, Intramics, Deltronic pins, thread plug/ring gages |
Cleared for regulated work.
ISO 9001:2015 certified, ITAR registered with DDTC, and pursuing CMMC Level 2 for the handling of Controlled Unclassified Information.
Have a part for one of these machines?
Send your print and requirements and we'll tell you how we'd approach it.